CARA SETTING IP DHCP MENGGUNAKAN CISCO

DESAIN DHCP

SETTING ROUTER

-Klik Router

-Pilih CLI

-Isikan Script

Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#interface fa 0/1

Router(config-if)#ip address 192.168.34.7 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#exit

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router(config-if)#no shutdown

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip dhcp pool cobadhcp

Router(dhcp-config)#network 192.168.34.8 255.255.255.0

FastEthernet 0/1 di Router dan Switch harus sama

SETTING DHCP

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip dhcp pool cobadhcp

Router(dhcp-config)#network 192.168.34.8 255.255.255.0

Router(dhcp-config)#default-router 192.168.34.7

Router(dhcp-config)#exit

Router(config)#do write memory

Building configuration...

[OK]

Router(config)#exit

Router#

%SYS-5-CONFIG_I: Configured from console by console

IP ADDRESS saat di setting host ID di network harus sama dengan host ID di router

setting IP yang digunakan 192.168.34.7 dengan Network 192.168.34.8

IP CONFIG DHCP DI PC0

IP CONFIG DHCP DI PC1

MENCOBA MENAMBAHKAN SATU PC

IP DHCPNYA langsung masuk atau ada karena sudah di setting di CLI nya